Product and Support News

WiFi 5: End of Life for Legacy WatchGuard Wi-Fi Access Points

On December 31, 2026, WatchGuard AP125, AP225W, AP325, AP327X, and AP420 access points will reach End of Life (EOL). After this date, WatchGuard will no longer provide technical support or firmware updates for these models.

These access points are currently managed through either:

  • Gateway Wireless Controller (GWC) on a Firebox with Basic Wi-Fi
  • WatchGuard Wi-Fi Cloud with Secure Wi-Fi or Total Wi-Fi

The access points do not immediately stop providing wireless connectivity upon reaching EOL. However, the legacy management options associated with these devices are also being phased out. Customers should review the information below and plan their migration to current access points managed in WatchGuard Cloud.

Gateway Wireless Controller (GWC)

For AP125, AP225W, AP325, AP327X, and AP420 access points managed through Gateway Wireless Controller on a Firebox:

  • After EOL, APs continue to broadcast SSIDs and allow wireless clients to connect based on their last applied configuration.
  • WatchGuard will no longer provide technical support or firmware updates for these APs.
  • Fireware uses an extended management license indicator for EOL access points: "never" on Fireware v12.6 or higher and March 1, 2027 on Fireware v12.5.x or lower.
  • For Fireboxes running Fireware v12.5.x or lower, including T15, T15-W, T35-DW, and T35-R, AP management will no longer be available after the March 1, 2027 license expiration for EOL access points.
  • WatchGuard plans to remove Gateway Wireless Controller beginning with Fireware v2027.1, currently targeted for the end of Q1 2027.

After GWC is removed, legacy APs can continue operating on their last applied configuration. Still, they can no longer be managed through GWC on Fireboxes running a Fireware version in which the controller has been removed.

WatchGuard Wi-Fi Cloud

For APs currently managed through WatchGuard Wi-Fi Cloud:

  • APs continue to broadcast SSIDs and provide wireless connectivity based on their last applied configuration after EOL.
  • WIPS capabilities continue according to the offline WIPS configuration established before EOL.
  • WatchGuard will no longer provide technical support or firmware updates for EOL models.
  • WatchGuard plans to shut down access to the Wi-Fi Cloud management portal in January 2027.
  • After Wi-Fi Cloud is shut down, customers will no longer be able to manage or change AP configurations through the service. The APs will continue operating using their last applied configuration.

Customers using Wi-Fi Cloud should retrieve any configuration information they need before the service is shut down and begin planning their migration to WatchGuard Cloud-managed access points.

WatchGuard recommends migrating legacy APs to current Wi-Fi 6 or Wi-Fi 7 access points managed through WatchGuard Cloud. The current recommended migration paths are:

Legacy AP Recommended Replacement
AP125 AP130
AP225W AP130
AP325 AP330 or AP340
AP327X AP332CR
AP420 AP432

Current WatchGuard access points provide centralized management in WatchGuard Cloud, along with active firmware and security updates and technical support with a valid license.

What Should Customers Do?

Customers using affected AP models should:

  1. Identify affected APs and how they are currently managed.
  2. Review and preserve existing configurations, particularly for deployments managed through Wi-Fi Cloud.
  3. Plan migration before legacy management capabilities are retired.
  4. Select an appropriate current WatchGuard AP based on deployment requirements.
  5. Review the migration documentation before replacing legacy APs.

Resources

 

Filed under: Wi-Fi