Knowledge Base Digest - March 2022
11 Abril 2022
Articles
- Cyclops Blink: Information for devices that run in FIPS mode
- Cyclops Blink: Firebox models supported by Fireware v12.7.2 U2, v12.5.9 U2, or v12.1.3 U8
- Cyclops Blink FAQs This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- Cyclops Blink: Remediate Firebox Cloud This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- Cyclops Blink: Remediate FireboxV and XTMv This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- Cyclops Blink: Remediate a locally-managed Firebox This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- Cyclops Blink: Tips to rebuild your Firebox configuration This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- Cyclops Blink: Recovery steps for XTM 5 and 8 Series devices This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- 4-Step Cyclops Blink Diagnosis and Remediation Plan This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- FAQs on the Cyclops Blink Botnet This article is available in Deutsch, English, Español, Français, Italiano, 日本語, and Português.
- Devices powered by Firebox PoE ports reboot when Firebox reboots
- Disable SIP-ALG on the Firebox
- Standalone device remains after you add the device to a FireCluster in WatchGuard Cloud
- Wi-Fi in WatchGuard Cloud access point LED indicators
Known Issues
- "Configuration is not valid" error after Logon app installation
- Authentication with AuthPoint fails for FireClusters that run Fireware v12.8
- Connectwise configuration question feature key data not synchronized
- Device name does not update when deployment fails for new cloud-managed Firebox
- DHCPv6 packets are not forwarded between member interfaces of an external VLAN
- Firebox Cloud upgrade to v12.8 breaks SSH keys for CLI access
- FireboxV devices with less than 2GB RAM that run v12.8 might not pass integrity check and fail to boot
- Push notifications not received by newly-installed AuthPoint mobile app for iOS
- XTMv devices with less than 4GB RAM that run v12.1.3 Update 8 might not pass integrity check and fail to boot
New or Updated Video Tutorials
- Upgrade Firebox Firmware
- FireCluster
- Cyclops Blink Detection Tools
- Cyclops Blink Remediation for Firebox XTM Rackmount Devices