On the Dashboard > Interfaces page, you can see the bandwidth used by each interface on your Firebox or XTM device and detailed information about each interface. This includes wireless interfaces configured for your AP devices.
On the Interfaces page, Bandwidth tab, you can review the bandwidth of incoming and outgoing connections through each interface on the XTM device.
For each interface, these details are included:
The trust zone for this interface.
The IP address for this interface.
The gateway defined for this interface.
The network mask configured for this interface.
The MAC address defined for this interface.
Total amount of bandwidth used (in KB) for traffic sent over this interface.
Total amount of bandwidth used (in KB) for traffic received over this interface.
To see detailed information about the Firebox or XTM device network interfaces:
If the interface is active, Up appears. If it is not active, Down appears.
The interface name.
Includes whether each interface is enabled or disabled.
The IPv4 address configured for each interface.
Network mask for each interface.
The gateway defined for each interface.
The MAC address for each interface.
The interface number.
The trust zone for each interface.
The IPv6 address configured for the selected interface. When you select an interface, if IPv6 is configured for that interface, information about the IPv6 configuration for that interface appears in this text box.
The DNS Servers that generate the IP address for the external interface, if you configure the external interface on the device to use a PPPoE server to get an IP address.
For any external interface with DHCP enabled, you can release or renew the DHCP lease on an IP address. This includes external VLAN interfaces.
For more information about the Dashboard pages, see About the Dashboard and System Status Pages.