To connect to Fireware XTM Web UI, you use a web browser to go to the IP address of the Firebox or XTM device trusted or optional interface over the correct port number. Connections to the Web UI are always encrypted with HTTPS; the same high-strength encryption used by banking and shopping web sites. When you type the URL in your browser, make sure to type https at the start of the URL, not http.
By default, the port used for the Web UI is 8080. The URL to connect to the Web UI in your browser is:
<Firebox-IP-address> is the IP address assigned to the trusted or optional interface on your device. When you make this connection, the browser loads the Log In page. The default URL for a WatchGuard Firebox or XTM device is:
You can change the IP address of the trusted network to a different IP address. For more information, see Common Interface Settings.
For example, to use the default URL to connect to your device:
This warning appears each time you connect to the XTM device unless you permanently accept the certificate, or generate and import a certificate for the device to use. For more information, see About Certificates.
By default, the XTM device configuration only allows connections to Fireware XTM Web UI from the trusted and optional networks. To change the configuration to allow connections to the Web UI from the external network, see Connect to Fireware XTM Web UI from an External Network.
About Fireware XTM Web UI