Threat Detection and Response (TDR) is a collection of advanced malware defense tools that correlate threat indicators from Fireboxes and Host Sensors to enable real-time, automated response to stop known, unknown, and evasive threats.
As part of the TDR solution, you install TDR Host Sensors to provide endpoint protection. In some cases, the TDR Host Sensor might have conflicts with the antivirus software installed on your endpoints. To resolve this issue, you can configure exclusions in the antivirus software and in TDR.
This document includes information about the integration of a TDR Host Sensor with a host that runs Microsoft Security Essentials. It does not describe the procedure to set up Threat Detection and Response. For information about how to set up your TDR account, how to enable TDR on a Firebox, and how to install a Host Sensor, see Quick Start — Set Up Threat Detection and Response.
To avoid conflicts between the TDR Host Sensor and Microsoft Security Essentials, add these exclusions:
Exclusions in TDR for Microsoft Security Essentials:
- C:\ProgramData\Microsoft\Microsoft Antimalware\
- C:\Program Files\Microsoft Security Client\
- C:\Program Files (x86)\Microsoft Security Client\
Exclusions in Microsoft Security Essentials for the TDR Host Sensor:
- 64-bit Windows — C:\Program Files (x86)\WatchGuard\Threat Detection and Response\
- 64-bit Windows — C:\Program Files (x86)\WatchGuard\Threat Detection and Response\amd64\host_sensor.exe
- 64-bit Windows — C:\Program Files (x86)\WatchGuard\Threat Detection and Response\amd64\TDRSensorStatus.exe
- 32-bit Windows — C:\Program Files\WatchGuard\Threat Detection and Response\
- 32-bit Windows — C:\Program Files\WatchGuard\Threat Detection and Response\x86\host_sensor.exe
- 32-bit Windows — C:\Program Files\WatchGuard\Threat Detection and Response\x86\TDRSensorStatus.exe
If the Host Sensor and Microsoft Security Essentials detect and respond to a threat at the same time, this can cause high utilization of system resources such as CPU, memory, and disk I/O.
To complete this deployment, you must have:
- An active Threat Detection and Response subscription with Host Sensor licenses
- Microsoft Security Essentials 188.8.131.52
The TDR and Fireware versions tested for this deployment included:
- TDR Host Sensor 184.108.40.20664
- Firebox with Fireware v12.3 or higher
The Windows test environment for this deployment included:
- Windows 7, 8.1, 10 Enterprise 64-bit Operating System
- Memory (RAM) — 8 GB
- Processor — 2 CPU Cores
Configure Exclusions in TDR
In your TDR account, add the exclusions to manually identify paths for files and processes that you do not want Host Sensors to monitor. Before you deploy a Host Sensor on computers that have Microsoft Security Essentials installed, add exclusions for the Microsoft Security Essentials file paths as TDR Exclusions in your TDR account.
In your TDR account, add the TDR exclusions for the paths shown in the Integration Summary.
Unless otherwise noted, configure each TDR exclusion with these options, which are selected by default:
- Also exclude subfolders
- Entities to exclude: Files and Processes
To add an exclusion in TDR:
- Log in to your TDR account or managed account as a user with Operator privileges.
- Select Configuration > Exclusion.
- Click Add Exclusion.
The Add Exclusion dialog box appears.
- In the Path text box, type the path to exclude. Folders specified in an exclusion must end with a backslash.
- To apply the exception to all hosts, in the Hosts / Groups text box, specify the group All Hosts.
- Click Save & Close.
Repeat these steps to add each exclusion.
Configure Exclusions in Microsoft Security Essentials
In Microsoft Security Essentials add the exclusions to identify the paths for files and locations to exclude. To prevent conflicts between the Host Sensor and Microsoft Security Essentials, we recommend you add exclusions in Microsoft Security Essentials for the paths used by the TDR Host Sensor.
To exclude directories used by the TDR Host Sensor, add the exclusions for the paths listed in the Integration Summary.
To add an exclusion in Microsoft Security Essentials:
- Open Microsoft Security Essentials board.
- Select the Settings tab.
- From the left panel, select Excluded files and locations.
- Click Browse to add exclusion.
- From the left panel, select Excluded processes.
- Click Browse to add exclusion.
For information about the integration testing methodology, see TDR Testing Methodology.