About FireCluster on Wireless Models
You can configure two Firebox T30-W, T50-W, XTM 25-W, 26-W or 33-W wireless devices as a FireCluster. When wireless is enabled, you can configure FireCluster only in active/passive mode.
FireCluster is not supported for Firebox T10-W wireless models.
When you configure two wireless Fireboxes as a FireCluster, the configuration must meet these requirements:
- FireCluster is not supported when the Firebox has wireless enabled as an external interface.
- If the FireCluster Interface for management IP address is on an interface that is bridged to a wireless network you cannot use a wireless connection to manage the device.
- The External Guest Authentication hotspot type is not supported for a wireless FireCluster.
For more information about the FireCluster interface for management IP address and the primary and backup cluster interfaces, see Before You Begin.
All other FireCluster requirements and restrictions described in Configure FireCluster also apply to wireless devices.