Contents

Related Topics

Manual BOVPN Configuration Examples

You can configure a branch office VPN between two Fireboxes or between a Firebox and a third-party VPN gateway that supports IPSec standards.

Firebox VPN Configuration Examples

These examples show how to set up a VPN between two Fireboxes, and how to route different types of traffic through the tunnel.

Third-Party VPN Configuration Examples

To set up a Branch Office VPN between a Firebox and a third-party VPN gateway, you must configure both VPN gateway endpoints with the same VPN settings.

IPSec replay detection is enabled in Firebox branch office VPNs by default, and you cannot see or change this setting. To set up a VPN between a Firebox and a third-party device, VPN replay detection must also be enabled on the third-party device.

You can set up a branch office VPN between a Firebox and any other device that supports the same settings. For reference, we provide several examples that demonstrate how to set up a manual BOVPN between a Firebox and a third-party device:

You can also set up a branch office VPN tunnel between a Firebox and other devices as long as the remote gateway endpoint is configured to use compatible settings.

Give Us Feedback     Get Support     All Product Documentation     Technical Search